Wind Power Plant Construction

Turbine Foundation Construction — Starting from the excavation and lean concrete stage, this includes the complete execution of anchor cage assembly, cable conduit installation, grounding lines, and drainage infrastructure. It also covers mass concrete pouring in accordance with the project specifications, curing processes, followed by foundation waterproofing and backfilling works.

Internal Access Roads — Opening roads with the width and gradient required for the transport of heavy-load blades and tower components. This includes ground improvement works on existing roads, constructing culverts and related civil structures, and laying and compacting upper-layer road materials such as PMT and crushed stone.

Crane Platforms (Crane Pads) — For the safe installation of the main erection cranes, ground stabilization is carried out in accordance with the results of bearing capacity tests (plate loading tests), and the platform surface is leveled and prepared for assembly.

Cable Trenches and Cable Laying — Excavation of trenches to the project-specified depth for the plant’s MV (Medium-Voltage) lines. This includes laying cable bedding sand, placing the cables into the trench without damage, and closing the trench after installing protective plates and warning tapes.

Route Survey and Logistics Support — Along the transport route from the port to the construction site, curve widening works are carried out, bridge bypass roads are constructed, and logistical obstacles are removed to ensure the smooth access of specialized equipment such as blade lifters to the site.